Power & Mount
Powering Up
- Find your car's 12V outlet (often near the dash or console).
- Plug in the included adaptor.
- Connect the cable to the Bee's Power port (underside of device).
LED for Power
| LED for Power | What it Means |
|---|---|
| Solid or slow red pulse (over 4 seconds) | Power is good |
| No light | No power |
| Fast blinking / mismatch | Check power source / short condition |
The Bee is designed to be powered using a 12 volt accessory outlet. While the Bee may be powered using a USB-C charging port, not all vehicles supply enough power to these ports to successfully power the Bee.
Approved Vehicle Types
| Approved | Not Approved |
|---|---|
| Vehicles with at least four wheels | Vehicles that don't have four wheels |
Approved Vehicles Mount Positions
Forward Facing Only
High-quality usable imagery begins with great mount positions. There are currently two approved mount positions (as shown below).
Watch a video to learn how to install the Bee internally on your vehicle.
Example Approved Mounts
Watch a video to learn how to install the Bee externally on your vehicle.
Your Bee is powered and mounted. You're now ready to Connect and Activate in the next step.